How to Keep Enamel Pins from Falling Off

If you’re a pin collector, you know the frustrating feeling of your pins falling off.

Whether you’re wearing your pins on a jacket or backpack, or displaying them on a pinboard, it’s always disappointing when a pin comes loose.

While there’s no guarantee that your pins will never fall off, there are some things you can do to reduce the likelihood of this happening.

Why do Enamel Pins Fall Off?

Before we get into how to keep your pins from falling off, it’s helpful to understand why they might fall off in the first place.

• One possibility is that the metal posts on the back of the pins are simply too short. Over time, the weight of the pin can cause the post to bend or break, making it easy for the pin to fall off.
• Another possibility is that the metal posts are not properly secured to the back of the pin. If the posts are not glued or soldered in place, they can easily come loose, causing the pin to fall off.

Tips for Keeping Them from Falling Off

Here are a few tips to keep your enamel pins from falling off:

Choose the right pins

It’s important to choose the right type of pins to make sure they won’t fall off or get loose that easily.

First, be sure to choose pins that are made with strong materials. Pins that are made with thin metal or plastic are more likely to bend or break, resulting in a loose fit.

Second, look for pins that have multiple points of contact. Pins that only have one attachment point are more likely to come loose than those with two or more points of contact.

Finally, look for pins that have a flat back and a metal clasp. Avoid pins with sharp edges or small parts that could come loose. In addition, make sure to buy the enamel pins from reliable pin manufacturers to ensure quality products that won’t fall easily.

Use a strong adhesive

Using a strong adhesive is critical to keeping your pins in place. We recommend using strong glue like E-6000 or super glue.

Apply a small amount of adhesive to the back of the pin, and then carefully position the pin on your clothing or pinboard.

Be sure to let the adhesive dry completely before wearing or handling the item. If you don’t like glues, you can also try using double-sided tape or a safety pin for extra support.

You should also make sure to test the adhesive before putting on your clothes. This will help ensure that it will stay in place all day long.

Pin in the right place

Always pin your enamel pins in the right place. Avoid delicate fabrics like silk that can snag, and choose heavier materials like denim or leather instead.

The back of a denim jacket is a popular option, but it can be difficult to find the right spot. If you’re having trouble, try putting the pin on a piece of paper and holding it in place until you find the perfect spot.

You should also avoid pinning your pins too close to the edge of a garment, as this increases the risk of them being caught on something and pulled off.

Be careful when removing pins

How you remove your pins can also affect how well they stay in place. Avoid pulling or twisting the pin, as this can damage the metal and make it more likely to come loose.

The best way to do this is to hold the pin with one hand and gently twist the back with the other. This will loosen the grip without putting too much pressure on the front of the pin.

If the back is still attached, simply pull it off. However, if the back comes off but the pin doesn’t don’t panic!

Just grab a pair of needle-nose tweezers and carefully remove the pin from wherever it’s stuck. With a little care and attention, you can keep your enamel pins safe and sound.

FAQs

Q: What is the best way to store enamel pins?

A: The best way to store enamel pins is in a cool, dry place. Avoid storing them in direct sunlight or humid environments, as this can cause the metal to tarnish or the enamel to fade.

Q: How can I tell if my enamel pin is of good quality?

A: A good-quality enamel pin will have a smooth, even finish with no bubbles or rough edges. The metal should be sturdy and free of any scratches or dents.

Q: Do enamel pins come in different sizes?

A: Yes, enamel pins come in a variety of sizes. The most common size is 1 inch, but you can also find them in smaller or larger sizes.

Q: How can you tell if an enamel pin is rare?

A: The best way to tell if an enamel pin is rare is to check the edition size. The edition size is the number of pins that were made in a particular design. If the edition size is low, it means that there are fewer of that particular pin in existence and it is considered to be rarer.

Q: Can enamel pins be washed?

A: Yes, enamel pins can be washed, but you should take care to avoid getting the metal too wet. Water can cause the metal to rust or the enamel to fade. If you do get your pin wet, be sure to dry it off as soon as possible.

Q: What to do if an enamel pin falls off?

A: If an enamel pin falls off, the best thing to do is to try to find it as soon as possible. The longer it is lost, the harder it will be to find. Once you find the pin, you can try to reattach it using a strong glue like E-6000 or super glue.

Wrap Up

Enamel pins are a great way to show off your style, but they can be tricky to keep in place.

With a little bit of care and attention, you can make sure your pins stay put all day long.

Be sure to choose the right adhesive, pin in the right place, and remove your pins carefully to keep them looking their best.

We hope this guide was helpful and you can now keep your enamel pins safe and sound!