Top tips for choosing quality solvent cement for the job

There are many types of solvent cement. You should choose one that is appropriate for the conditions you will face. In addition to pipe size, you should also consider whether it is for a pressure DWV system or a potable water system. To choose the correct solvent cement, check the can product and the manufacturer’s specifications. It is also essential to check the rating of the cement for the application site.

The solvent cement should be used according to the application and pipe diameter.

The viscosity of the solvent cement will vary depending on the type of resin. The higher the viscosity, the better. The amount of resin you use will determine the viscosity and how well it will fill the gaps in the joints. As a general rule, the solvent cement should be used according to the application and pipe diameter. The schedule will determine the type of cement you need.

Select the right type of solvent cement based on these factors.

The cement viscosity is based on the amount of resin in it. The higher the resin content, the more viscosity is needed. It is essential because it helps fill gaps in the joint and prevents it from cracking. The viscosity of the solvent depends on the diameter of the pipe and the schedule of application. You should select the correct type of solvent cement based on these factors.

Consider the environment. 

When selecting solvent cement, consider the environment. High temperatures and extreme temperatures will affect the solvent cement’s set time. If the pipe and fitting are subjected to these conditions, use a lighter-bodied cement solution. A heavy-bodied solution will be more effective for industrial use. In addition, you should also choose a product with a primer. Primer is a mixture of additional solvents that you can apply to the pipe to soften it and free up surface molecules. Then, the material solution will soften further and make a strong connection between the pipe and fitting.

If you’re not sure how to use the solvent cement, ask the manufacturer for a sample.

Using solvent cement from IPS Corp Plumbing is a fast, easy, and safe way to join pipes and fittings. It uses resin and solvents to chemically fuse the pipe and fittings into one continuous piece of plastic. Several types of system features require this joining method. Follow the seven steps for a successful installation. If you’re not sure how to use the solvent cement, ask the manufacturer for a sample.

Ensure you have a cool area to work in.

Avoid heat. It is best to use solvent in cooler parts of the day. You can’t apply solvent cement on a hot pipe during hot days. It will make it prone to humidity and temperature changes. Ensure you have a cool area to work in. Keeping the pipe clean will reduce the risk of damage. Some manufacturers recommend using wet rags to cool the joint before applying solvent.

Take into account the pipe material you’re working with.

When choosing solvent cement, it is essential to consider the pipe material you’re working with. You’ll need to decide whether to use a CPVC or an ABS pipe. The type of cement you’re using will depend on your application. In some cases, you may need a thicker solvent cement for a large pipe. When this is the case, it’s better to choose a thinner type of solvent than a heavy one.

Consider the pipe and fitting material. 

When choosing solvent cement for a CPVC system, you should consider the pipe and fitting material. Some common types of CPVC include PVC, ABS, and CVPC. Depending on the type of pipe, you’ll need PVC-compatible cement for a fitting. It would be best if you chose a cement compatible with your pipe material. It is crucial as it can lead to failure of the joint.

Solvent cement for CPVC is made from a mixture of solvent and resin. The former has more resin and less solvent than the latter. The two components can be mixed using the solvent, which allows it to bond firmly. If the pipe is damaged, you should cut it off 5 centimetres away from the crack to allow for it to soften and bond well. A good quality connection between the pipe and fitting is essential for a successful project.