If you are someone who loves spending lots of time outside either in the form of doing camping, hiking, kayaking, or cross-country skiing, then you would know that there comes a time when your equipment becomes your only savior. And if we look at the most important part of the equipment that you need for such scenarios then that has to be the flashlight. It offers you the much-needed light in the dark so that you can get through dangerous situations. Hence, taking care of your flashlight is equal to taking care of yourself.

But with that being said, what are the tips that you have to keep in mind for the right maintenance and care of Olight Flashlight? To answer your concern, we have come up with a list that will definitely help you – irrespective of what type of flashlight you own.

Flashlight Maintenance Steps

To begin with, you have to know that there are only four basic steps involved in taking great care of your flashlight – cleaning, replacing, protecting, and lubricating. And with this guide, we are going to shed light on all four of them so that you are able to rely on your LED flashlight with ease whenever you need them the most.

1. Clean the Flashlight from Outside

You have to start off with the process by doing the simplest of things and that is related to cleaning the flashlight. Take an alcohol pad or anything similar to remove the dirt from the outer part of the flashlight. You can also use a small brush or a toothbrush for areas which you think you cannot clean with your fingers. Once you are done removing the dirt from the outside, it’s time to wipe the lenses. We would recommend you to wipe the lenses on a regular basis – irrespective of whether your flashlight is dirty or not.

2. Move to The Inside Of Flashlight For Cleaning

Now you would be required Q-tips or cotton swabs. The procedure is going to be pretty much similar to the way you are going to clean the outside of the flashlight. Your overall goal should be to remove all kinds of dirt, oil, or grease from the flashlight. Keep on wiping the threads unless you don’t see crystal clear results.

3. Inspection Time

Although there is no specific point where you should start inspecting as you can do it while you are cleaning your flashlight as well. But all in all, you are supposed to pay attention to all the connections, threads, etc., so that you know that there isn’t any possibility of corrosion or any other unwanted thing that may just be on the verge of popping up. In case, if you do find out signs of corrosion, we would recommend you to visit the local tool shop or even contact the retailer from where you have bought the flashlight.

4. Extra Protection

You can skip this step if you don’t feel the utmost need for it but we would suggest you to consider once if you want to protect your flashlight for a longer period of time in the best possible way. You can consult the manufacturer’s website to see any protection products available which will not only help you in cleaning it, but some of them can also boost the performance of your flashlight to the next level. Moreover, different types of flashlight protectors on your flashlight contacts, threads, and springs can make caring a lot easier for you.

5. Lubricate When Needed

At first, it may sound like a very odd idea but lubricating a flashlight is one of the essential steps for taking care of your flashlight. When you lube your flashlight screws and O-rings, they become easy for unscrewing and it is also considered as the best thing to keep O-rings fresh and nice from time to time.

One tube is generally enough for almost a dozen uses, maybe even more, so buying it should be on the top of your list after you buy a flashlight from https://www.olightstore.com/.

If you are going to take care of all the steps mentioned above, we bet your investment in flashlights will yield great results for as long as you wish it to.