Why I am Getting No Internet After Netgear Extender Setup?

Once you are done with Netgear extender setup, you will get extended speed of the internet in every nook and cranny of your house. But, hold on! You connected your computer, laptop and mobile device to the Netgear extender’s WiFi network but got no internet? Need not to worry! You are not alone in the battle. However, with this troubleshooting guide, you can easily get rid of the no internet connection issue after Netgear extender setup in a fly. Let’s start over!

No Internet After Extender Configuration

Fix 1: Connect to the Correct SSID

The moment you have set up your Netgear WiFi extender using IP or the web address, you will get a new, extended SSID. Maybe you are connecting your WiFi devices to the existing or unknown network rather than your extender’s WiFi.

As a result, you will get no internet after Netgear extender setup. So, to make the most out of your internet connection, ensure to get connected to your extender’s WiFi only.

Fix 2: Relocate the Netgear Extender

Where you have placed your Netgear extender? Is it placed near to thick or concrete walls or it is placed in a corner, under a table, inside an almirah, or near a window? If your answer to the mentioned questions in in yes, then possibilities are you will get no internet on your connected devices. So, to get the most out of your extender’s WiFi, ensure to keep your extender openly on a higher and ventilated area.

Apart from this, we also suggest you locate your Netgear extender away from baby monitors, Bluetooth speakers, corners, lower surface, and congested area. Once you’re done, try accessing  to see if the no internet connection issue is now fixed or not.

Fix 3: Complete the Configuration Process

Chances are that you haven’t set up your Netgear WiFi range extender properly due to which you are unable to make the most out of its internet connection. So, be sure to configure your extender properly.

In order to perform the Netgear extender setup process in a hassle-free way, connect it to your router using an Ethernet cable. Once you’re done, open a web browser of your choice on your PC or laptop and navigate to page. Use the extender’s default username and passphrase or network key into the given fields and hit the Log In button. As soon as you logged in successfully, the Netgear Genie setup page will appear. After that, go through the on-screen steps and make your Netgear WiFi range extender up and running in minutes.

Fix 4: Update the Extender Firmware

Another easy yet effective way to resolve the no internet connection issue after Netgear extender setup is to update its firmware to the latest firmware version. Walk through the instructions below to update the extender’s firmware to the most recent version:

• Power on your Netgear range extender.

• Ensure to plug the extender into a working wall socket near to your existing router.

• Connect the extender and your router using a wireless source or an Ethernet connection.

• Now, turn on a computer or laptop.

• Type http:192.168.1.250 in the address bar and press the Enter key.

• You will be taken to mywifiext setup page.

• Insert the extender username and passphrase into the prompted fields.

• Hit the Log In button.

• Locate and click on the Firmware Update section.

• If there is any new firmware version is available for your range extender, hit the Update button and get the job done in minutes.

After updating the extender’s firmware, try accessing the internet on your devices and see if it works for you or not.

Fix 5: Reset the Netgear Extender

None of the troubleshooting tactics listed above fixed the issue for you? If you nod in yes, then you are left with no other option than to reset your Netgear range extender. Keep in mind that the resetting process will delete all customized settings made by you on your Netgear extender. So, it’s better for you to take the back up of the extender settings.

Is your internet connection working fine after resetting Netgear extender? Share your thoughts via comments with us.