Everything You Need to Know About Pipe Leak Tape

Plumbing leak is a common problem and there are different types of tapes used to fix                                                               this issue. You can fix a leaking joint by using pipe thread tape. To fix non-joint leaks or hairline cracks, you need silicone tape also known as leak repair, self-fusing or self-amalgamating tape. You need different types of tapes to fix leaks at different spots. In case you don’t know about the kind of tape you need, call a plumber in Coomera.

Let’s learn about different types of pipe leak tapes.

The following types of tapes are commonly used in plumbing applications:

1. Silicone tape
2. Pipe thread tape

You can find these tapes in a hardware store.

Silicone Tape

Also known as “self-fusing tape” or “self-amalgamating tape”, silicone tape is self-adhesive. You can use this tape to create a temporary waterproof seal around a pipe leak.

Pipe Thread Tape

Also known as “plumber’s tape”,  “Teflon tape”, “PTFE tape” and “thread seal tape”, pipe thread tape is used when a joint is leaking.

Pipe Leak Tape Applications

Silicone tapes and pipe thread tapes are used for different applications. Using a pipe thread tape to fix a non-joint leak is not an effective solution. Similarly, silicone tape will not work at the place of pipe thread tape.

Leaking Joints

The putty sealing or tape sealing at joints wear out with time. The connection at joints also becomes loose. This leads to leakage. Use a pipe thread tape in both of these situations.

Fracture Leaks

Damage to a pipe can lead to problems like hairline fracture and leaks. If you notice water leaking from the middle of a pipe, it is most likely to be a fracture. Use silicone tape to create a waterproof seal around the pipe. Keep in mind that this is a temporary solution. You need to call a plumber in Coomera for a permanent solution. You cannot use pipe thread tape.

How to use Pipe Leak Tape?

It is easy to use pipe leak tape. Take the following steps:

• Disconnect the connection.
• Turn off water.
• Unscrew the leaking joint. Pay attention to the way you screw and unscrew it.
• Remove the existing seal.
• Apply the pipe thread tape.
• Wrap the tape 4 to 6 times.
• Screw the pipe.
• Test the joint for leaks.

How to Fix Fracture Leak with Silicone Tape

Using silicone tape to fix a fracture leak is simple. Take the following steps:

• Locate where the pipe is leaking.
• Turn off the water supply.
• Completely dry the area around the leak.
• Start wrapping the tape. The tape should be wrapped and it should overlap several times.
• Wrap the tape around the surrounding area as well.

Will it Fix The Problem for Good?  

Pipe thread tape is the most used solution to fix leaks. When done right, the tape can fix the issue and the joint will not leak for years. So, you can call it a long-term solution. On the other hand, silicone tape provides you with a temporary solution. You need to Google “plumber near me” to find a permanent solution. Silicone tape is ideal for preventing the wastage of water. This tape can keep a leakage from getting worse.

A pipe thread tape is a better solution than silicone tape. You can use tape to fix many problems. You can also do a DIY plumbing repair using pipe thread tape.

To fix leaks, you need to locate them. This is not always possible. When a pipe running in a wall starts leaking, this can cause serious damage to the structure of your house or office. So, better let a plumber in Coomera help you.