Ways To Protect Your Walls From Damage

To maintain an aesthetically pleasing interior, you have to ensure that chips and dings on your wall are avoided no matter how small. Apart from being an eyesore, it can be quite costly to repair these damages on your wall. To avoid any of these inconveniences, make sure to protect your walls from damage. This article lists down some of the best ways on how you will be able to do so.

Molding

One of the primary ways to protect your walls from damage is to install molding or surface guards. This can be attributed to the fact that chairs are considered to be one of the most common culprits when it comes to scratched walls. Thereby, to prevent them from scratching your wall, install a skirting board or a baseboard molding, as well as chair rails. Apart from preventing damage to your wall, these can also provide an aesthetic appeal to your interiors.

Doorstops

When your doorknob keeps on banging on your wall, it can also cause excessive damage to your wall that can be quite costly to repair. For this reason, it is a good idea to install a door stop that will prevent your door from banging on your wall. The good thing about using door stops is that they can also alleviate you from the noise caused by a door banging into a wall.

Adhesive Hooks

There is also the option for you to use adhesive hooks or picture rails in putting up artwork, frame, or wall decor. In this case, you are not damaging your wall because you are not driving a nail through it. More often than not, this will create lasting damage that proves to be costly to repair. Conversely, adhesive hooks and rails can be easily removed if you no longer need to use them. This will also pave the way for you to effortlessly change and update the interior decor of your room.

Screws

Finally, you can also opt to use screws to hang pictures on plaster rather than banging nails into plaster. Doing the latter can cause cracks on your wall. In case you need to use a small nail, protect your wall with masking tape. In case you notice plaster coming loose from the lath, you can simply reattach it with a plaster washer. For this, you need to use a drywall screw starting at the outer edge of the loose plaster, working towards the center. As soon as the plaster is already firmly reattached, hide it with washers with several coats of drywall compound. Finish the repair by sanding your wall then applying a fresh coat of paint.

There are several ways on how you will be able to protect your walls from damage such as through the use of molding or doorstops. There is also the option for you to leverage chair slipcovers as well as adhesive hooks. Rest assured that all your efforts in keeping your walls in their best condition will prove to be worth it in the end as you are alleviated from the inconvenience caused by costly wall repairs.