Which One Is Best?

However, while a liquid cooler might provide more effective cooling, it will also increase the cost of your system. In addition, a liquid CPU cooler takes up a significant amount of room in your PC chassis.

Keep in mind that our testing have revealed that air CPU coolers can outperform liquid CPU coolers in some situations. Although the fans are quite quiet, the negative is that they may be fairly noisy. If you wan to read more about product reviews you can simply visit 7topreview they also have published detailed article about best cpu cooler for i7 9700k.

Are aftermarket CPU coolers worth it?

The answer to this question would be dependent on your requirements and tastes, but in general, there are two situations in which you would require an aftermarket CPU cooler:

  • Your standard fan is either too loud or not efficient enough to keep your CPU temperature under control during normal use.
  • You wish to increase the speed of your CPU.

Overclocking your CPU will almost always necessitate the use of an aftermarket CPU cooler in order to prevent your CPU and motherboard from becoming damaged by excessive heat buildup.

The more expensive the aftermarket cooler, the more effective and efficient its performance will be. However, there are also reasonably priced coolers that are also relatively quiet, which can be a great replacement for your stock CPU cooler if you are only interested in a quieter and/or cooler CPU as a secondary benefit.

If your computer overheats frequently, it’s vital to remember that the CPU cooler is not always to blame. Instead, try these steps to determine if your computer is overheating:

  • Clean your computer: Pay close attention to the cleanliness of your power supply, CPU, and GPU coolers, as well as the air intakes on your computer casing. Dust can cause a significant restriction in your airflow, which might result in overheating.
  • Improve the airflow in your PC: It’s possible that your CPU coolers are adequate, but that your CPU (and GPU) aren’t getting enough cool air from the outside to keep them running smoothly. Such cases are suitable for the installation of one or two case-mounted fans, which are also reasonably priced.

Frequently Asked Questions (FAQs)

1.   What socket does the i7 9700K use?

The LGA 1151 socket is used by the Intel i7 9700K processor.

2.   How Do You Install an Aftermarket CPU Cooler?

If your aftermarket CPU cooler has a different model number than the one you have, the specific installation procedure may differ. However, the basic procedure for installing an aftermarket CPU cooler is as follows:

Step 1: Apply thermal paste if necessary 

It is recommended that you place a thin layer of thermal paste between your CPU cooler and your CPU, which serves to facilitate heat transmission from the CPU cooler to the CPU cooler.

Some CPU cooler goods come with thermal paste already applied; thus, you should first examine the manual to see if the product comes with thermal paste already applied or if you need to apply it yourself.

If you haven’t previously, you should apply thermal paste to the top of your CPU lid if your cooler doesn’t have any already.

Not much is required; simply place a little dot in the middle of the CPU lid and distribute it evenly with the back of a credit card.

Step 2: Installing bracket 

Not all CPU cooler models need the use of a mounting bracket, but some do, and you may be required to install the mounting bracket, which screws through your motherboard and into the computer casing.

If the CPU cooler has to be installed, consult the instruction manual for details on how to attach it to your case. If you are installing a liquid CPU cooler, you should also install the radiator according to the manufacturer’s instructions.

Step 3: Aligning your CPU cooler 

The next step is to take your cooler and place it directly over your processor. It is possible that you will need to remove the fans from your cooler during the installation process, however this will depend on the type of the cooler.

Step 4: Mounting the CPU cooler 

Once the CPU cooler has been installed, the connections should be pushed in or screwed in in an X-shaped configuration. Don’t tighten the screws in a square pattern since this will provide unequal pressure across the CPU, which can have a negative influence on cooling performance.

Step 5: Attaching the fans 

If you removed any fans while connecting the CPU to the cooler, you may now reconnect them to the cooler. Refer to the CPU cooler’s user manual for instructions on how to connect it correctly.

Last but not least, double-check that everything is securely fastened and that all of the elements have the necessary power.

About Ambika Taylor

Myself Ambika Taylor. I am admin of For any business query, you can contact me at [email protected]